Installation and Upgrade Guide

Publication 1757-IN510A-EN-P - October 2003
2-22 Operating System Installation Procedures
14. Select the Custom settings option and click Ne x t .
15. At the Networking Components window, select In ter n et
Protocol (TCP/IP) and click Properties.
16. In the Internet Protocol (TCP/IP) Properties window:
a. Select the Use the following IP address option.
b. Enter the appropriate IP address information.
The following Private Networking IP Address scheme can be
utilized for the system to operate:
c. Enter the Subnet Mask >255.255.255.0<.
d. Enter a default gateway if necessary.
e. Click OK to return to the Networking Components window.
TIP
If setup has not found a suitable Network Device,
you are prompted for installing one. Follow the
instructions for adding a manufacturer supplied
driver or add the Microsoft Loop Back adapter.
Table 2.D Private Networking IP Address scheme
PC Type Suggested Private Networking IP Address
Client NIC 1: 192.168.0.x
NIC 2: 192.168.1.x
where x is the Station number +2 (for Station number 2, x=4)