Installation and Upgrade Guide

1 Publication 1757-IN510A-EN-P - October 2003

Chapter

Firmware Maintenance Procedures

1784-PCIC Driver

Installation

If you are using ControlNet for your Supervisory Network, you must

have a 1784-PCIC card installed in each Server. Refer to the 1784-PCIC

Installation Instructions, Publication 1784-IN003. If you have not yet

configured your 1784-PCIC card device drivers, a Found New

Hardware Wizard opens after each restart.

Install Hardware Device Drivers

1. Restart the PC.

2. Logon as ps_user.

3. If the Found New Hardware Wizard opens, skip to step 8. If the

Found New Hardware Wizard does not open, continue with the

next step.

4. Right-click the My Computer icon and select Man age.

5. Select Device Man ager.

6. Under Other Devices, right-click the PCI device and select

Properties.

7. On the Driver tab, click Up date Dr i v er .

8. Click Ne x t .

9. Select the Search for a suitable driver option and click Ne x t .

10. Uncheck the Floppy disk drives and the CD-ROM drives

checkboxes.

11. Check only the Specify a location checkbox and click Ne x t .

12. Insert the ProcessLogix R510.0 Application Software CD into the

CD-ROM drive.