Installation and Upgrade Guide

Publication 1757-IN510A-EN-P - October 2003
Additional Redundant Server Procedures 6-15
20. If you have redundant LANs, you must repeat Step 1 through
Step 19 to set up files for the second LAN using the name or IP
address of SERVERA and SERVERB specified in the Hosts file
for the second LAN
.
Navigate in Knowledge Builder to Server and Client
Configuration Guide
⇒ Configuring and Monitoring a
Redundant Server System
⇒ Configuring Stations for Server
Redundancy
⇒ Dual Network Configuration for more
information.
21. Click Station ⇒ Ex i t .
22. Click Yes to exit Station.
Setting Up Station on
SERVERB
1. On SERVERB, click Start ⇒ Pr ogr ams ⇒ ProcessLogix
Server
⇒ Station.
2. Click Cancel at the Unable to connect prompt, if applicable.
3. Click Station ⇒ Con n ect to call up the Station Connect dialog
box.
4. Click New Connection.
5. On the Connection tab, make these entries to have the Station
point to SERVERB (PLX1 B):
a. In the Server field, enter or Br o w se to the Secondary Server
name, SERVERB.
b. Select the Station type as Static Station.
c. Enter >2< as the Static Station Number and click Advan ced.
d. Check the Aux iliary setup file checkbox.
e. Click Br o w se and navigate to:
C:\Honeywell\Client\Station\default.stn
and click Op en .
IMPORTANT You must indicate the full path to the .stn file.