Installation and Upgrade Guide

Publication 1757-IN510A-EN-P - October 2003
Additional Redundant Server Procedures 6-11
6. On SERVERB, click Star t ⇒ Run .
7. Enter >cmd< and click OK to open the DOS window.
8. At the DOS prompt, enter >dual_status< and press <Enter>.
9. The unsynchronized SERVERB data should be similar to this:
10. Verify that the data link is available.
Configuring Stations in
Quick Builder (on
SERVERA)
1. Click Start ⇒ Pr ogr ams ⇒ ProcessLogix Server ⇒ Quick
Builder.
2. Select the Ne w Pr o j e c t option and click OK.
3. In the Save in drop-down list, select
C:\Hon eyw ell\client\qckbld.
4. Enter >Stations.qdb< in the File name field and click Save.
5. Wait for the Enable Components dialog box to open.
a. Under the System/License Details tab, click the down arrow
and select ProcessLogix - R500 from the Server drop-down
list.
b. Select the En a b l e Co m p o n e n t s tab.
c. Click Un sel e ct Al l, then check Static Station and Ser ver.
d. Click OK.
e. A Quick Builder prompt stating that you have not selected
any devices appears. Click OK to continue.