Installation and Upgrade Guide

Publication 1757-IN510A-EN-P - October 2003
Additional Redundant Server Procedures 6-9
Configuring the Time Service
1. To set up the time service on SERVERA, complete the steps in
Knowledge Builder at ProcessLogix R500
⇒ Server and Client
Configuration Guide
⇒ Configuring and Monitoring a
Redundant Server System
⇒ Synchronizing Date and Time on
the Servers.
2. Close Knowledge Builder.
Restarting ProcessLogix Services
1. Click Start ⇒ Pr ogr ams ⇒ ProcessLogix Server ⇒ Start-Stop
ProcessLogix Server to call up the ProcessLogix Server dialog
box.
2. With the Full Mode version of the dialog box active, click the
System Running option.
3. Click Yes to confirm the action and wait for the Server to change
its state.
4. Close the ProcessLogix Server dialog box.
Setting Up Secondary
Server (SERVERB)
Use the following procedures to set up the Secondary SERVERB.
Making Redundant Hardware File Entries
Refer to Making Redundant Hardware File Entries on page 6-7 and
repeat the procedures on SERVERB. Change the reference in Step 1
from SERVERB to SERVERA and in Step 2 from SERVERA to
SERVERB.
TIP
To display the “Full Mode” version of the
ProcessLogix Server dialog box, click the icon to the
left of ProcessLogix in the title bar and click
Advanced
⇒ Full Mo de. A checkmark appears in
front of the Full Mode selection to show that it is
active.