Installation and Upgrade Guide

Publication 1757-IN510A-EN-P - October 2003
ProcessLogix Server Upgrade Procedures 4-19
7. Close the Add/Remove Programs window.
8. Close the Control Panel window.
9. Using Windows Explorer, delete the folder C:\Honeywell.
10. Click Yes, as necessary, to confirm.
11. Empty the Recycle Bin.
12. Restart the PC.
Removing ProcessLogix R500.1 Software is complete.
Return to the checklist that led you to this task.
Removing ProcessLogix
R400.0 SP2 Software
This procedure completely removes ProcessLogix software from your
system, including:
• SQL
• Knowledge Builder
• RSLinx
• Engineering Tools
• Server and/or Station
Removing Selected ProcessLogix R400.0 SP2 Components
1. If necessary, logon to the system as ps_user.
2. Click Star t ⇒ Settin gs ⇒ Control Panel.
3. Double-click Add/Remove Programs.
ATTENTION
!
Before installing or uninstalling any software
component, you MUST exit all ProcessLogix
applications and stop all ProcessLogix services. You
must complete the procedure in
Stopping
ProcessLogix Applications and Services on page 8-1
before continuing.
If you have a redundant server pair, you must
complete this procedure on SERVERB first. Then
complete the entire procedure again on SERVERA.