Installation and Upgrade Guide Instruction Manual

Publication 1757-IN500A-EN-P - September 2002
2-40 Operating System Installation Procedures
Windows XP
Use the following procedure to create a recovery disk for your Windows XP
installation.
1. Insert a blank diskette into the PC's floppy drive.
2. Click Start ⇒ Programs ⇒ Accessories ⇒ System Tools ⇒
Backup.
3. If the Backup or Restore Wizard appears, click Advanced Mode.
4. Click Automated System Recovery Wizard.
5. Click Next.
6. Enter a backup media or file name and click Next.
7. Click Finish.
8. Repeat Steps 1 through 5 with another blank formatted diskette.
9. Click Job ⇒ Exit.
10. Store the two diskettes in different places to protect against damage to
the diskettes.