Installation and Upgrade Guide Instruction Manual

Publication 1757-IN500A-EN-P - September 2002
ProcessLogix R500.1 Installation Introduction 1-3
ProcessLogix Client
Supported Installations
The ProcessLogix R500.1 Client requires Windows 2000 Professional or XP
Professional operating systems. The following table lists the ProcessLogix
Client Install options. First, select the operating system you plan to use and
then select an install type.
Table 1.C Selecting a ProcessLogix R500.1 Client Install Options
Step 1: Select an
R500.1 Operating
System
Windows 2000 Professional Windows XP Professional Windows 2000 Server
Step 2: Select a type
of install:
Refer to: Refer to: Refer to:
Clean Install ProcessLogix Client Installation and
Upgrade Procedures on page 5-1.
Clean Install: Windows XP
Professional on page 5-7.
Windows 2000 Server on
page 5-3.
Windows 2000 Server is not
a recommended operating
system for Clients.
Upgrade from R400.0
Windows 2000
Professional Client
Upgrade R400.0 Windows 2000
Professional Client to R500.1
Windows 2000 Professional Client
on page 5-4.
Upgrade R400.0 Windows 2000
Professional Client to R500.1
Windows XP Professional Client on
page 5-7.
Upgrade R400.0
Windows NT 4.0
Upgrade R400.0 Windows NT 4.0
Client to R500.1 Windows 2000
Professional Client (Clean Install) on
page 5-5.
Upgrade R400.0 Windows NT 4.0
Client to R500.1 Windows 2000 XP
Client (Clean Install) on page 5-8.
Upgrade from R320.0
Windows NT 4.0
Upgrade R320.0 Windows NT 4.0
Client to R500.1 Windows 2000
Professional Client (Clean Install) on
page 5-6.
Upgrade R320.0 Windows NT 4.0
Client to R500.1 Windows 2000 XP
Client (Clean Install) on page 5-9.