Installation and Upgrade Guide Instruction Manual

Publication 1757-IN500A-EN-P - September 2002
ProcessLogix Client Installation and Upgrade Procedures 5-23
Restoring ProcessLogix Data
The following items should be considered before you begin operating your
ProcessLogix Client.
Table 5.K Post-upgrade Considerations
Item Post-upgrade
Custom Displays If necessary, use Windows Explorer to create the
C:\Honeywell\client\abstract.
Copy backed up displays from the backup directory to
C:\Honeywell\client\abstract.
Custom displays may require modification for use in an
R500.1 system.
System Displays You must reapply the changes to the new display after the
upgrade.
Station Menus You must reapply the changes to the new menus after the
upgrade.
Localization You must reapply the settings after the upgrade.
Station configuration file You must reapply the changes to the new station.ini file after
the upgrade.
Station setup file The new default setup file is configured to as
“static
Station 1”. If this is not correct, you must make the
appropriate changes via Station’s Setup menu. See the
Configuration Guide for details.
Navigate in Knowledge Builder to Server and Client
Configuration Guide
⇒Configuring Stations and
Printers
⇒Setting Up Station for more information.