Installation and Upgrade Guide Instruction Manual

Publication 1757-IN500A-EN-P - September 2002
ProcessLogix Server Upgrade Procedures 4-27
11. Empty the Recycle Bin.
12. Restart the PC.
Installing ProcessLogix
R500.1 Software
The following table lists the items you MUST complete to install the
ProcessLogix software.
Finalizing R400.0 to R500.1
Upgrade
Reconnect Redundant Servers
If you have a redundant Server pair, both the SERVERA and SERVERB
nodes should have been upgraded to ProcessLogix R500.1.
1. Shutdown both servers.
2. Reconnect the Ethernet network cable(s).
3. Restart both nodes (SERVERA and SERVERB) before proceeding to
the next step.
Transferring R400.0 Data to the R500.1 Server
1. If you have a non-redundant server:
a. Enter this command:
xcopy T:\R400Data\*.* C:\R400Data /E
and press <Enter>.
b. If necessary, enter >D< to specify that R400Data is a directory.
2. If you have a redundant Server pair,
✔
Step Item Page
1. Windows 2000 Service Pack 2 Installation 2-28
2. Windows 2000 Security Rollup Installation 2-30
3. Internet Explorer 6.0 Installation 2-32
4. Internet Explorer 6.0 Security Update Installation 2-34
5. Updating Windows Installer 2-36
6. Installing ProcessLogix R500.1 Software 3-2