Installation and Upgrade Guide User guide

Publication 1757-IN032B-EN-P - April 2001
System Software Upgrade Procedures 1-27
2. Check the application title in the title bar.
• If the title is RSLinx Lite, go to Step 3.
• If the title is RSLinx OEM you already have the OEM version
installed and you do not have to install the activation file.
– For ControlNet Supervisory Networks, skip to Configuring
RSLinx Drivers for ControlNet Supervisory Network on
page 1-29.
– For Ethernet Supervisory Networks, skip to Configuring
RSLinx Drivers for Ethernet Supervisory Network on
page 1-38.
3. Close RSLinx.
Installing the Activation File
1. Locate the RSLinx Master Disk and insert it into the floppy drive.
2. Click Start
⇒Run.
3. Key in this path location in the Open entry field or use Browse to
navigate to the evmove.exe file on the diskette.
>A: (or your floppy drive letter)\EVMOVE.EXE<.
4. Click OK to launch the move executive.