Installation and Upgrade Guide User guide

Publication 1757-IN032B-EN-P - April 2001
System Software Upgrade Procedures 1-9
3. Click Start⇒Programs⇒ProcessLogix Server⇒Start-Stop
ProcessLogix Server to call up the ProcessLogix Server dialog box.
a. With the Full Mode version of the dialog box active, click the
Database Unloaded option.
b. Click Yes to confirm the action and wait for the Server to
change its state.
c. Close the ProcessLogix Server dialog box.
4. Click Start
⇒Programs⇒Rockwell Software⇒RSLinx⇒RSLinx
Service Control Panel to call up the RSLinx Service Control dialog
box.
a. Click Stop.
TIP
To display the “Full Mode” version of the ProcessLogix
Server dialog box, click the icon on the left of the title
bar and click Advanced
⇒Full Mode.
A checkmark will now appear in front of the Full
Mode selection to show that it is active.
TIP
The ProcessLogix Control Data Access Server
service must be stopped before you can stop
RSLinx through its control panel.