Installation and Upgrade Guide User guide

Publication 1757-IN032B-EN-P - April 2001
7-2 Performance and Capacity Specifications
Please refer to the table below to review the hardware requirements for a
new R320.0 ProcessLogix server or client system. ProcessLogix Clients
require a Windows NT operating system to support the multiple-user
configuration nodes architecture that is possible with R320.0
ProcessLogix systems.
Platform System Configuration Definitions
Small System
A small configuration may consist of 1 non-redundant Server with 1
Station or a redundant server pair. The system typically includes only
passive monitoring and occasional report generation.
Medium System
A medium configuration may consist on 1 non-redundant Server and
multiple Stations or a Redundant Server pair with no more than 2
additional Stations. This type of system includes 1 or 2 Stations actively
monitoring and occasional report generation.
Large System (Windows NT workstation as the operating system)
A large configuration may consist of a Non-redundant Server and up to
10 stations or a Redundant Server pair and up to 8 stations. These systems
typically include active monitoring from multiple Stations with or
without multiple locations and random report generation.
Table 7.A Server Requirements
Base Dell OptiPlex GX200
Processor 800Mhz,Pentium III, 133Mhz Front Side Bus
Integrated Functions 4X AGP Video w/8MB of Memory, Audio, 512KB Cache 10/100 NIC
Mouse MicroSoft Intellimouse
Keyboard Quietkey Spacesaver 104-Key, US
System RAM 256MB, ECC PC700, 1 RIMM
CD-ROM 40X SCSI
Floppy Drive 1.44MB, 3.5"
SCSI Controller Adaptec 29160N Controller
Hard Drive 9.1GB Minimum U2W, 10,000 RPM, SCSI
Tape Drive 10/20 G, SCSI, TR-5, Tape Backup Unit
Network NIC, 3COM 3C905C Integrated Network Adapter Card, RJ45
I/O Expansion 3 PCI, 2 shared, 2 ISA
Software MicroSoft NT4.0 (Service Pack 6a), NTFS
All hardware component drivers