Installation and Upgrade Guide User guide

Publication 1757-IN032B-EN-P - April 2001
Additional Redundant Server Procedures 4-17
2. Key in this command in the Open entry field:
>Notepad %SystemRoot%\timeserv.ini<
3. Click OK to open the Notepad application.
4. Edit the timeserv.ini file to replace the line PrimarySource =. with
the new name of the Primary Server.
5. Click File
⇒Save to save changes.
6. Click File
⇒Exit to close Notepad.
7. Click Start
⇒Run.
8. Key in this command in the Open entry field:
>timeserv -update<
and click OK to execute.
9. Click Start
⇒Run.
10. Key in this command in the Open entry field:
>timeserv -automatic<
and click OK to execute.
11. Click Start
⇒Run.
12. Key in this command in the Open entry field:
>net start “time service”<
and click OK to execute.
TIP
The %SystemRoot% is the path to the timeserv.ini
file, such as C:\WINNT\timeserv.ini.
EXAMPLE
If your Primary Server is PLX1A, the line would
become: PrimarySource=\\plx1a.