User Manual Manual

58 Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
Chapter 3 Create an RSFieldbus Software Project
The Customization dialog box appears.
2. Do one of the following to move available parameters to selected
parameters and vice versa:
– Select an ‘Available’ parameter and click the right arrow to
move the parameter to the ‘Selected’ parameter box.
– Select a ‘Selected’ parameter and click the left arrow to move
the parameter to the ‘Available’ parameter box.
3. Click Apply.
4. Click OK.
TIP
Procedures are the same for the three tabs—Default, Type, Tag.