User Manual Manual

Rockwell Automation Publication 1757-UM012A-EN-P - July 2011 39
Create an RSFieldbus Software Project Chapter 3
1. Right-click the H1 icon and choose Configure Device Class.
The Device Class dialog box appears.
2. Select the device that you want to change to a Backup LAS and click the
right arrow .
3. Repeat for any other devices that you want to change to a Backup LAS.
4. Click Apply.
Change Device Class to Basic
Do these steps to change the device class of a device from Backup LAS to Basic.
1. Right-click the H1 icon and choose Configure Device Class.
The Device Class dialog box appears.
ATTENTION: During this procedure, control of the associated devices
and anything linked to them will be lost.