User Manual Manual

Rockwell Automation Publication 1757-UM012A-EN-P - July 2011 15
Chapter 2
RSFieldbus Software Basics
Introduction
This section describes the windows in RSFieldbus software and some of the tool
features found in these windows.
If you want to start using RSFieldbus software immediately, go to Chapter 3
.
The table lists the software topics described in this section.
The menu bar contains actions specific to the selected window. These windows
open depending on which actions you have completed.
Main Window
The Main window contains the main menu bar, a toolbar, and the windows
described in the following sections.
Figure 3 - RSFieldbus Main Window
Topic Page
Main Window 15
Project Window 17
Fieldbus Window 18
Process Cell Window 19
Strategy Window 20
Communication Window (error log) 25
Toolbar
Menu Bar