Manual

138 Publication 1757-UM007D-EN-P - December 2008
Appendix A Troubleshooting
Using RSLogix 5000 to
Diagnose Problems
Right-click the module while online in RSLogix 5000 software to
display the Module Properties dialog box. This may help in
diagnosing some problems, especially connection errors.
General Tab
Connection Tab
The Inhibit Module checkbox breaks the exclusive ownership
connection between the 1757-ABRIO module and the ControlLogix
controller. If you would like to download to the 1757-ABRIO module
without putting the controller in Program mode, check Inhibit
Module. Once you are done updating the 1757-ABRIO module,
uncheck Inhibit Module and your connection will be re-established.
Item Description
Type 1756-MODULE Generic 1756 Module
Vendor Allen-Bradley
Name Defined when you configured the module.
Description Defined when you configured the module.
Comm Format Matches what you defined when module was configured.
Slot Matches what you defined when module was configured.
Connection
Parameter
Matches what you defined when module was configured.
If this box is checked Then
Major Fault on Controller if
Connection Fails While in Run
Mode
This causes the module to fault the controller if the
connection between the ControlLogix controller and the
module fails.