Manual

Publication 1756-UM009C-EN-P - December 2010 349
Use Ladder Logic To Perform Run Time Services and Reconfiguration Appendix C
Configuration Dialog Boxes
The example below shows the message configuration setting for rung 0 if
using RSLogix 5000 software version 9 and earlier
For the newer versions of RSLogix 5000 software, you are required only to
choose a Service Type and configure the Instance.
See the table on
page 345 for an explanation of the field relationships for
the two dialog boxes.
This window contains the same
information for each rung,
except for the Object Attribute
field. The information in this
field is as follows:
Rung 0 - 6e
Rung 1 - 6c
Rung 2 - 6b
Rung 3 - 6d
Rung 4 - 6f
RSLogix 5000 Software, Version 9 and Earlier
RSLogix 5000 Software, Version 10 and Later