Manual

Publication 1756-UM009C-EN-P - December 2010 225
Configure ControlLogix Analog I/O Modules Chapter 10
Calibration Tab
The Calibration tab lets you recalibrate the default factory calibrations, if
necessary. Calibration corrects any hardware inaccuracies on a particular
channel.
See
Chapter 11 for specific module calibrations.
Although each dialog box maintains importance during online monitoring,
some of the tabs, such as the Module Info and Backplane, are blank during the
initial module configuration.
Download Configuration
Data to the Module
After you have changed the configuration data for a module, the change does
not take affect until you download the new program that contains that
information. This downloads the entire program to the controller, overwriting
any existing programs.
Follow these steps to download the new program.
1. At the top, left corner of the RSLogix 5000 software program, click the
status icon.
2. Choose Download.
The Download dialog box appears.
3. Click Download.