Manual

212 Publication 1756-UM009C-EN-P - December 2010
Chapter 10 Configure ControlLogix Analog I/O Modules
2. After the channels are configured, do one of the following:
• Click Apply to store a change but stay on the dialog box to choose
another tab.
• Click OK if you are finished making changes.
Alarm Configuration Tab
The Alarm Configuration tab on the Module Properties dialog box lets you
program high and low limits, disable and latch alarms, and set a deadband or
rate alarm per channel.
For alarm information, see
page 63 and page 64 .
1. Choose from the options on the Alarm Configuration tab.
IMPORTANT
The 1756-IR6I, 1756-IT6I, and 1756-IT6I2 modules have
additional configurations, such as temperature units and
cold option junctions. See
page 215 and page 216 for dialog
box examples.
Field Name Description
Channel Click the channel that is being
configured.