Manual

Publication 1756-UM009C-EN-P - December 2010 203
Configure ControlLogix Analog I/O Modules Chapter 10
2. Click the ‘+’ next to Analog for a list for this module group.
3. Select a module and click OK.
4. Click OK to accept the default major revision.
The New Module dialog box appears.
5. In the Name box, type a module name.
TIP
To find the revision number, open RSLinx software. Click the
RSWho icon and choose the network. Open the module, and
then right-click the module to choose Properties in the
pull-down menu. The revision number is among the properties.