Manual

Publication 1756-UM009C-EN-P - December 2010 13
Preface
Introduction
This manual describes how to install, configure, and troubleshoot your
ControlLogix analog I/O module.
Who Should Use This
Manual
You must be able to program and operate a Rockwell Automation
ControlLogix controller to efficiently use your analog I/O modules. If you
need additional information, refer to the related documentation listed below.
Additional Resources
The following table lists related ControlLogix products and documentation.
If you need more information on these products, contact your local Rockwell
Automation distributor or sales office. The documentation listed in the Related
Documentation table is available at
http://www..rockwellautomation.com/literature .
Related Documentation
Cat. No. Resource
1756-A4, 1756-A7, 1756-A10,
1756-A13, 1756-A17
ControlLogix Chassis, Series B Installation
Instructions, publication
1756-IN080
1756-PA72, 1756-PB72, 1756-PA75,
1756-PB75, 1756-PH75, 1756-PC75
ControlLogix Power Supplies Installation
Instructions, publication
1756-IN613
1756 digital I/O modules ControlLogix Digital I/O Modules User Manual,
publication
1756-UM058
1756-CNB, 1756-CNBR ControlNet Modules in Logix5000 Control Systems,
publication
CNET-UM001
1756-DNB DeviceNet Modules in Logix5000 Control Systems
User Manual, publication
DNET-UM004
1756-DHRIO ControlLogix Data Highway Plus-Remote I/O
Communication Interface Module User Manual,
publication
1756-UM514
1756-ENBT, 1769-ENET EtherNet/IP Modules in Logix5000 Control Systems
User Manual, publication
ENET-UM001
1756-Lx ControlLogix Selection Guide,
publication
1756-SG001
1756-Lx ControlLogix System User Manual,
publication
1756-UM001
1756-Lx, 1769-Lx, 1789-Lx,
PowerFlex 700S
Logix5000 Controllers Common Procedures
Programming Manual, publication
1756-PM001
1756-Lx, 1769-Lx, 1789-Lx, 1794-Lx,
PowerFlex 700S
Logix5000 Controllers General Instructions
Reference Manual, publication
1756-RM003