User Manual

8 ControlLogix Remote I/O (RIO) Module
Rockwell Automation Publication 1756-IN610B-EN-P - November 2010
1756-RIO Module as an Adapter
As an adapter, the 1756-RIO module lets the controller exchange data with or
monitor an existing scanner. The module supports the following features:
• Has one remote I/O channel
• Emulates one or more racks
• All remote I/O baud rates: 57.6, 115.2, 230.4 Kbaud
• Rack numbers from 0…76 octal
• All combinations of partial racks
• Block transfers at all possible locations
• Can monitor I/O on a network with an existing remote I/O scanner
(Monitor Mode)
• Transfers all I/O to the controller via produced/consumed connections
over the backplane to the controller.
IMPORTANT
The module firmware can be updated using the Windows utilities
software supplied with the module.