User Manual User guide

38 Publication 1756-UM534B-EN-P - November 2010

Chapter 2 Configure Scanner Mode

Configure Scanner

Summary

The following list summarizes the steps to configure the 1756-RIO module in

scanner mode.

1. Set the baud rate.

2. Autoconfigure online racks on the network. (Make sure the controller is

set to Program Mode.)

3. Set the communication path.

4. Manually add any additional racks that are not online.

5. Manually add and configure block transfer modules.

6. Map/Automap the data.

1756 Controller

Remote I/O Module

Scanner Mode

1771-ASB

Remote I/O Adapter

1771

I/O

1747-ASB

Remote I/O Adapter

1746

I/O

1771 I/O

1746 I/O

Universal Remote I/O Network

Scanner Mode

44803