User Manual User guide

Publication 1756-UM534B-EN-P - November 2010 127
Monitor Remote I/O Chapter 5
This also clears the fatal error on the module. When the Save In dialog
box opens, navigate to the location on the hard drive where you want to
save the error log file and give it a filename.
6. Contact Technical Support. See the BackCover
.
7. Provide Technical Support with the fatal error log file to help them
diagnose the cause of the problem.
8. After clearing the fatal error, you must download the configuration to
the 1756-RIO module.
See Download and Upload Configurations on page 91
for instructions on how
to download configurations to the 1756-RIO module.
ATTENTION
You must clear the fatal error before you can use the module
again, and you shouldn’t use it again until you have determined
what caused the error.