User Manual User guide

124 Publication 1756-UM534B-EN-P - November 2010
Chapter 5 Monitor Remote I/O
Adapter Mode
To launch LogMon in adapter mode, follow these steps.
1. From the Monitor menu, choose Debug Log.
2. Set the RSLinx communication path when prompted and Select OK to
start LogMon.
Clear Diagnostics
To clear diagnostics, follow these steps.
1. From the Monitor menu, choose Diagnostic Counters.
Once you set the communication path via RSLinx software, the
DiagMon window displays.
2. From the Actions menu, choose Clear Diagnostics, or click the Clear
Diagnostics button on the toolbar.
TIP
These same instructions apply for scanner and adapter mode.