User Manual

Rockwell Automation Publication 1756-UM540A-EN-P - May 2014 7
Preface
This manual describes how to install, configure, and troubleshoot your
ControlLogix® isolated analog I/O module.
You must be able to program and operate a ControlLogix controller to efficiently
use your isolated analog I/O modules. If you need additional information, refer
to Additional Resources on page 8
.
ControlLogix isolated analog I/O modules convert analog signals to digital
values for inputs and convert digital values to analog signals for outputs.
Controllers use these signals for control purposes.
By using the producer/consumer network model, ControlLogix isolated analog
I/O modules produce information when needed while providing additional
system functions.
Studio 5000 Environment
The Studio 5000® Engineering and Design Environment combines engineering
and design elements into a common environment. The first element in the
Studio 5000 environment is the Logix Designer application. The Logix Designer
application is the rebranding of RSLogix
5000 software and continue to be the
product to program Logix5000
controllers for discrete, process, batch, motion,
safety, and drive-based solutions.
The Studio 5000 environment is the foundation for the future of
Rockwell Automation® engineering design tools and capabilities. It is the one
place for design engineers to develop all the elements of their control system.