User Manual

136 Rockwell Automation Publication 1756-UM540A-EN-P - May 2014
Chapter 7 Configure ControlLogix Isolated Analog I/O Modules
View the Module Tags
When you create a module, the Logix Designer application creates a set of tags
that you can view in the Tag Editor. Each configured feature on your module has
a distinct tag that is available for use in the controller’s programming logic.
Complete these steps to access a module’s tags.
1. In the Controller Organizer, right-click Controller Tags and choose
Monitor Tags.
The Controller Tags dialog box appears with data.
2. Click the + symbols to view module tags as shown in the
following graphic.
For more information on module tags, see Appendix A, Isolated Analog I/O
Module Tag Definitions on page 173.