User Manual

114 Rockwell Automation Publication 1756-UM540A-EN-P - May 2014
Chapter 6 Install ControlLogix Isolated Analog I/O Modules
Assemble the RTB
and the Housing
Removable housing covers the wired RTB to protect wiring connections when
the RTB is seated on the module.
1. Align the grooves at the bottom of each side of the housing with the side
edges of the RTB.
2. Slide the RTB into the housing until it snaps into place.
1
4
3
2
3
2
20858-M
Item Description
1Housing cover
2Groove
3 Side edge of RTB
4 Strain relief area
IMPORTANT
If additional wire routing space is required for your application, use the
extended-depth housing, catalog number 1756-TBE.