Owner manual

Rockwell Automation Publication 1756-UM533C-EN-P - February 2011 159
Module Troubleshooting Chapter 11
Use RSLogix 5000 Software
to Troubleshoot a Module
In addition to the status displayed on the module, RSLogix 5000 software alerts
you to fault conditions. You are alerted in one of these ways.
• Warning signal in the I/O Configuration next to the module - This occurs
when the connection to the module is broken
• Fault message in a status line
• Notification in the Tag Monitor
• General module faults
• Diagnostic faults
• Status on the Module Info Page
Fault Condition