Manual

Status Indicators and Troubleshooting 5-5
Publication 1756-UM524B-EN-P - December 2008
6 0x00000006 Incorrect Data Setting for
NX03_Node_Param[2] “Node
Mode at start up”
Correct the Data Setting for
NX03_Node_Param[2]
7 0x00000007 Incorrect Data Setting for
NX03_Node_Param[4] “Message
Send Port Number”
Correct the Data Setting for
NX03_Node_Param[4]
8 0x00000008 Incorrect Data Setting for
NX03_Node_Param[5] “Node Alive
Receive Port Number”
Correct the Data Setting for
NX03_Node_Param[5]
9 0x00000009 Incorrect Data Setting for
NX03_Node_Param[6] “Node Alive
Interval”
Correct the Data Setting for
NX03_Node_Param[6]
10 0x0000000a Incorrect Data Setting for
NX03_Node_Param[7] “Node Alive
Count”
Correct the Data Setting for
NX03_Node_Param[7]
11 0x00000010 Multicast_Group_Number is out of
range for
NX06_Multicast_Group_Param
Correct the Data Number for
Entry0~7
Multicast_Group_Number
12 0x00000011 Online Port Number is out of range
for NX06_Multicast_Group_Param
Correct the Data Number for
Entry0~7 Online Port Number
13 0x00000012 Test Port Number is out of range
for NX06_Multicast_Group_Param
Correct the Data Number for
Entry0~7 Test Port Number
14 0x00000013 S/R OK Flag Value is out of range
for NX06_Multicast_Group_Param
Correct the Data Value for
Entry0~7 S/R OK FlagValue
15 0x00000014 Multicast_Group_Number is
overlapped for
NX06_Multicast_Group_Param
Correct the Data Number for
Entry0~7
Multicast_Group_Number
16 0x00000015 Port Number is overlapped Correct the Port Number for
Entry0~7and also check the value
for NX03_Node_Param[4] and
NX03_Node_Param[5]
17 0x00000090 Low Limit Value is out of range for
NX07_Overflow_Param[0] “Low
Limit”
Correct the Data Setting for
NX07_Overflow_Param[0]
18 0x00000091 High Limit Value is out of range for
NX07_Overflow_Param[1] “High
Limit”
Correct the Data Setting for
NX07_Overflow_Param[1]
19 0x0000FFFF System has corrupted during the
NX Dlink Initialization
Refer to Appendix C, Web Page
Diagnostics
Table 5.E Module error codes
No. Error code Decription User action