Installation Instructions User Manual

ControlLogix™ Memory Board 9
Publication 1756-IN033B-EN-P - November 2000
Step 5: Install the Memory Board
A. Place the memory board over the connector and slide the memory board
into the controller.
B. Pull the plastic back edge of the controller out slightly to clear the tabs of the
memory board.
C. Line up the connectors.
D. Place your hands on the boards over the connectors and gently squeeze
them together.
E. Make sure that the tabs on the memory board extend through the slots on
the plastic housing of the controller.
40018
memory board
slot
slot
tab
tab