Owner's manual

Rockwell Automation Publication 1756-UM536A-EN-P - April 2012 35
Install the Counter Module Chapter 3
Assemble the Removable
Terminal Block and Housing
Removable housing covers the wired RTB to protect wiring connections when
the RTB is seated on the module. Parts of the 1756-TBCH RTB are identified in
the table.
Follow these steps to attach the RTB to the housing.
1. Align the grooves at the bottom of each side of the housing with the side
edges of the RTB.
2. Slide the RTB into the housing until it snaps into place.
1
4
2
2
3
3
5
20858-M
Item Description
1 Housing cover
2 Groove
3 Side edge of RTB
4RTB
5 Strain relief area
IMPORTANT
If additional wire routing space is required for your application, use the
extended-depth housing, catalog number 1756-TBE.