Owner manual

Rockwell Automation Publication 1756-UM022A-EN-P - November 2012 99
Chapter 7
Go Online with the Controller
Connecting the Controller to
the Network
If you have not done so, connect the controller to the network.
Topic Page
Connecting the Controller to the Network 99
Understanding the Factors that Affect Going Online 101
Download 103
Upload 104
Go Online 106
Table 32 - Communication Connections
For this type of
connection
Use See
USB USB 2.0 cable Make Communication Connections on
page 27
EtherNet/IP EtherNet/IP module in an open slot in the same
chassis as the controller
Connect Your EtherNet/IP Device and
Computer on page 100
DeviceNet 1756-DNB module in an open slot in the same
chassis as the controller
Connect Your ControlNet Communication
Module or DeviceNet Scanner and Your
Computer on page 100
ControlNet 1756-CN2 module in an open slot in the same
chassis as the controller