Owner manual

10 Rockwell Automation Publication 1756-UM022A-EN-P - November 2012
Preface
Additional Resources
These documents contain additional information concerning related products
from Rockwell Automation.
You can view or download publications at
http://www.rockwellautomation.com/literature
. To order paper copies of
technical documentation, contact your local Allen-Bradley distributor or
Rockwell Automation sales representative.
Table 3 - Publications Related to GuardLogix Controllers and Systems
Resource Description
(Safety)
Application
requirements
GuardLogix 5570 Controller Systems Safety Reference Manual,
publication 1756-RM099
Contains detailed requirements for achieving and maintaining SIL 3/PLe with the
GuardLogix 5570 controller system, using the Studio 5000 Logix Designer application.
GuardLogix Controller Systems Safety Reference Manual, publication
1756-RM093
Contains detailed requirements for achieving and maintaining SIL 3/PLe with the
GuardLogix 5560 or 5570 controller system, using RSLogix 5000 software.
CIP Sync (time
synchronization)
Integrated Architecture and CIP Sync Configuration Application
Technique, publication IA-AT003
Provides detailed and comprehensive information about how to apply CIP Sync
technology to synchronize clocks in a Logix control system.
Guard I/O™ Guard I/O DeviceNet Safety Modules User Manual, publication
1791DS-UM001
Provides information on using Guard I/O DeviceNet Safety modules.
Guard I/O EtherNet/IP Safety Modules User Manual, publication
1791ES-UM001
Provides information on using Guard I/O EtherNet/IP Safety modules.
POINT Guard I/O Safety Modules User Manual, publication 1734-UM013
Provides information on installing, configuring, and using POINT Guard I/O™
modules.
Hardware
installation
ControlLogix Chassis and Power Supplies Installation Instructions,
publication 1756-IN005
Describes how to install and ground ControlLogix® chassis and power supplies.
Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1
Provides in-depth information on grounding and wiring programmable controllers
Instructions
(programming)
GuardLogix Safety Application Instruction Set Reference Manual,
publication 1756-RM095
Provides information on the GuardLogix Safety application instruction set.
Logix5000 Controllers General Instructions Reference Manual,
publication 1756-RM003
Provides programmers with details about each available instruction for a Logix5000™
controller.
Logix5000 Controllers Motion Instructions Reference Manual, publication
MOTION-RM002
Provides programmers with details about the motion instructions that are available
for a Logix5000 controller.
Motion SERCOS Motion Configuration and Startup User Manual, publication
MOTION-UM001
Details how to configure a SERCOS motion application system.
Motion Coordinated Systems User Manual, publication MOTION-UM002 Details how to create and configure a coordinated motion application system.
CIP Motion Configuration and Startup User Manual, publication
MOTION-UM003
Details how to configure a Integrated Motion on EtherNet/IP networks application
system.
CIP Motion Reference Manual, publication MOTION-RM003
Detailed information on axis control modes and attributes for Integrated Motion on
EtherNet/IP networks.
Networks
(ControlNet,
DeviceNet
EtherNet/IP)
EtherNet/IP Modules in Logix5000 Control Systems User Manual,
publication ENET-UM001
Describes how to configure and operate EtherNet/IP modules in a Logix5000 control
system.
ControlNet Modules in Logix5000 Control Systems User Manual,
publication CNET-UM001
Describes how to configure and operate ControlNet modules in a Logix5000 control
system.
DeviceNet Modules in Logix5000 Control Systems User Manual,
publication DNET-UM004
Describes how to configure and operate DeviceNet modules in a Logix5000 control
system.
PhaseManager™ PhaseManager User Manual, publication LOGIX-UM001
Provides steps, guidance, and examples for setting up and programming a Logix5000
controller to use equipment phases.
Programming
tasks and
procedures
Logix5000 Controllers Common Procedures Programming Manual,
publication 1756-PM001
Provides access to the Logix5000 Controllers set of programming manuals, which
cover managing project files, organizing tags, ladder logic programming, testing
routines, creating Add-On Instructions, controller status data, handling faults,
importing and exporting project components and more.
Logix5000 Controllers Execution Time and Memory Use Reference
Manual, publication 1756-RM087
Assists in estimating the memory use and execution time of programmed logic and in
selecting among different programming options.