User Manual

Rockwell Automation Publication 1756-UM005B-EN-P - January 2013 89
Calibrate the Module Chapter 6
The low reference parameters appear first. These parameters define which
channels will be calibrated for a low reference.
5. Apply the calibrator’s low reference to the module.
The following example shows the channel status after calibrating for a low
reference. If the channels is OK, continue, as shown below. If any channels
report an Error, retry until the status is OK.
The high reference parameters appear next. These parameters define
which channels will be calibrated for a high reference.
Click Next to calibrate the low
reference.
Click Back to return to the previous
parameters and make any necessary changes.
Click Next to proceed.
Click Next to proceed.