User Manual

88 Rockwell Automation Publication 1756-UM005B-EN-P - January 2013
Chapter 6 Calibrate the Module
The Module Properties dialog box appears.
3. On the Input Calibration page, begin calibration.
The software warns you not to calibrate a module currently being used for
control.
4. Set the channels to be calibrated.
Click the Input Calibration tab.
Click here to start
calibration.
Click OK to continue calibration.
Choose the channel you
want to calibrate.
Click Next to continue.
Choose whether you want
to calibrate channels in
groups or one at a time.