User guide

ControlLogix™ Hydraulic Servo Module 17
Publication
1756-IN580A-EN-P - March 2003
Flashing red
light
The axis drive output is in
the shutdown state.
· Check for faults that may have
generated this state.
· Execute the Shutdown Reset motion
instruction.
· Resume normal operation.
Steady red light The axis drive is faulted. · Check the drive status.
· Clear the Drive Fault condition at the
drive.
· Clear the servo fault condition using
the Motion Axis Fault Reset
instruction.
· Resume normal operation.
· Check the configuration for the Drive
Fault.
· If configured to be
normally open and there is
no voltage, this is the
normal condition.
· If configured to be
normally closed and 24V dc
is applied, this is the
normal condition.
If the DRIVE
indicator
displays:
The module status is: Take this action: