User guide

FACTORYTALK HISTORIAN ME MODULE USER GUIDE
280
The System Status
section on the Home
page shows that Data
Collection is in
“Error” mode:
 Check the module STS LED light. Solid red indicates that
Data Collection is inactive.
 Go to the Advanced tab to view the System Log page.
Check the log for messages about the issue and export log
data.
 Go to the Web Diagnostics Firmware tab, and check the
Data Collection page. Process information can confirm
whether or not Data Collection is in a undesirable state.
N/A indicates an error state.
 Download additional information that will assist in trouble-
shooting as described in “General Guidelines”.
 Reboot the module.
 Contact Technical Support if the issues persists.
Data Collection
Symptom Solution