Manualshelf

Owner's manual

ManualsBrandsRockwell Automation ManualsEquipment1756-HIST2G FactoryTalk Historian ME 2.2
31323334353637383940
FACTORYTALK HISTORIAN ME MODULE USER’S GUIDE
30
2. Enter the IP address of FactoryTalk Historian ME in the Address field. The IP
address scrolls across the LED display on the front panel of FactoryTalk Historian
ME.
Note that the default network configuration type is DHCP. If a DHCP server is not
available, then an IP address will not be displayed. You will either need to
configure a DHCP server or use the AOP to set the IP address. For more
information about the AOP, see Appendix D, “RSLogix 5000 Add-on Profile” on
page 257.