Owner's manual

FACTORYTALK HISTORIAN ME MODULE USER’S GUIDE
142
After downloading the file from the module, users can use an XML parser to modify
the configuration. However, users should not change the following files:
 datacollection/dconf.xml
 datastorage/dsconf.xml
 datatransfer/dtconf.xml
Uploading a Backup File to the Module
The Upload To Module section shows the last uploaded file name and timestamp. It
also allows you to upload a previously backed up file to the module from the client
computer. You can also upload a backup file downloaded from one FactoryTalk
Historian ME to quickly configure another module.
You can only have one backup configuration file on the module at a time. If you
upload an older backup file, it will overwrite any newer backup file.
To upload a backup file to the module:
1. Click [Browse...].
2. Locate the file you want to upload and click [Open]. Note the following
restrictions:
 Backup configuration file names may not exceed 80 characters.
 Filenames may only contain the following characters: @, ., -, _ , a-z, A-Z, 0-9
 Filenames may not contain any spaces.
 The backup file must have the .tar.gz extension in its file name.
3. Click [Upload].
File names for up-
load may not exceed
80 characters