User Manual

Rockwell Automation Publication ENET-IN002F-EN-P - January 2014 83
Chapter 5
USB Communication
This chapter is intended to show only the steps that differ when using a
USB device port. These EtherNet/IP communication modules have a USB
device port:
• 1756-EN2F - ControlLogix EtherNet/IP Bridge module
• 1756-EN2T - ControlLogix EtherNet/IP Bridge module
• 1756-EN2TSC - ControlLogix EtherNet/IP Secure Communication
module
• 1756-EN2TR - ControlLogix EtherNet/IP 2-port module
• 1756-EN2TRXT - ControlLogix-XT EtherNet/IP 2-port module
• 1756-EN2TXT - ControlLogix-XT EtherNet/IP module
• 1756-EN3TR - ControlLogix EtherNet/IP 2-port module
Topic Page
Set Up the Hardware 84
Configure a Module via the USB Port 84
Load Firmware through a USB Port 87