User Manual

Rockwell Automation Publication ENET-IN002F-EN-P - January 2014 31
Install a 1756 EtherNet/IP Communication Module Chapter 1
Download the Firmware
Complete these steps to download and install the firmware.
1. Go to the Rockwell Automation Web site at
http://www.rockwellautomation.com/.
2. From the Support tab, product Product Compatibility & Download
Center.
3. On the Get Downloads tab, click Find Product Downloads.
4. Enter your search criteria and click Go.
5. Select the module from the list then click the Find Downloads button at
the bottom of the Selections tab.
6. Click the download graphic .
The Available Downloads window opens.
7. From the bulleted list, choose the firmware name.
The End User License Agreement opens.
8. Review the agreement and click I Agree.
The Rockwell Automation Download Manager opens and the download
begins. The location of the downloaded file is shown under the progress
bar.
9. When the downloaded is complete, click Close.
10. Locate the downloaded .zip file and extract it to a temporary directory.
11. Use the ControlFlash utility to install the firmware.