User Manual Owner's manual

Publication 1756-UM051B-EN-P - November 2000
Analog I/O with Direct Connection 6-7
8. Click on Channel 0 and enter the following Scaling parameters:
9. Click on Next twice to access the Limits page.
10.Enter the following Limits:
11.Click on Finish to save the configuration.
The I/O Configuration tree should now look similar to the one
shown below.
High Signal High Engineering
10.0 V
8000
(1)
(1)
This scaling is selected to use the 13-bit voltage
resolution of the 1756-OF8. See specifications in
publication 1756-6.5.9 for more information.
Low Signal Low Engineering
0.0 V 0
High Clamp 8000
Low Clamp 0