User Manual Owner's manual

Publication 1756-UM051B-EN-P - November 2000
Index
A
about the 1756-ENET/B module 1-1 to 1-5
control and information protocol (CIP) 1-4
mixing rack optimized and direct connections 1-3
module features 1-1
producer/consumer model 1-4
rack optimized and direct connections 1-2 to 1-3
requested packet interval (RPI) 1-5
what the module does 1-2
about this user manual P-1 to P-8
analog I/O with direct connection 6-1 to 6-12
add I/O module to configuration 6-4 to 6-7
create the example application 6-3 to 6-11
download program 6-11
edit controller tags 6-8 to 6-9
modify ladder program 6-10
set up the hardware 6-2
test example application 6-12
B
before you configure your module 3-1 to 3-6
BootP
using a BootP server
4-5 to 4-6
C
common techniques used in this manual P-2
configuration requirements 3-3 to 3-5
gateway address 3-4
IP address 3-3 to 3-4
subnet mask 3-5
configuring Ethernet communication drivers C-1 to
C-4
AB_ETH driver C-2 to C-4
installing the software C-1
configuring the Ethernet module 4-1 to 4-7
using a BootP server 4-5 to 4-6
using DHCP software 4-7
using RSLinx software 4-2 to 4-4
using the Rockwell BootP utility 4-1
consumed tags 1-4
control and information protocol (CIP) 1-4
controller tags
create consumer tags
7-15 to 7-17
create producer tags 7-4 to 7-5
editing 5-12 to 5-13, 6-8 to 6-9
ControlLogix gateway communication
1756-ENET/B support
D-1
using the 1756-ENET/B D-1
D
DCHP software
using to configure the Ethernet module
4-7
diagnostics
chassis who
B-5
diagnostic information B-3 to B-4
module information B-2
TCP/IP configuration B-2
web pages B-1 to B-5
direct connection
see analog I/O with direct connection
E
electronic keying F-1
Ethernet protocols 3-1 to 3-2
EtherNet/IP 3-2
SNMP 3-2
TCP/IP 3-1
UDP 3-2
EtherNet/IP 3-2
example applications
about the example applications
P-3
system components P-4
example network configurations E-1 to E-4
expanded system with FLEX I/O E-3
larger control networks E-4
small system example E-2
F
finding more information P-5
G
gateways 3-4
H
how to use this manual P-2 to P-4
I
I/O configuration
analog I/O
6-4 to 6-7
digital I/O 5-8 to 5-12
local ENET module 5-4 to 5-5
local ENET module in consumer 7-9 to 7-10
producer in consumer’s I/O configuration 7-13 to 7-14
remote ENET module 5-6 to 5-8
remote ENET module in consumer 7-11 to 7-12