Installation Instructions User Manual

Publication

1756-IN612B-EN-P - December 2009

OK Off Module does not have 24V DC power. Verify that there

is chassis power and the module is completely inserted

into chassis and backplane.

Flashing green Module is not configured.

Green Module is operating correctly.

Flashing red Module detected a recoverable fault. A configuration

error may have caused the fault.

Red Recycle power to the module. If this does not clear the

fault, replace the module. Check the module

configuration and, if necessary, reconfigure the module.

Red and alpha-

numeric display

scrolls 'Image

Update Needed'

The main firmware image needs to be updated.

Update the firmware image.

Once the image is updated, recycle power.

If this does not clear the fault, replace the module.

Flashing red and

green

Module performing power-up self-test. Wait for the

module to complete powering up and performing

self-test.

Indicator Status Description