Installation Instructions User Manual

Publication

1756-IN612B-EN-P - December 2009

2. Slide the module into the chassis, making sure the module backplane

connector properly connects to the chassis backplane and noting that

the module is properly installed when it is flush with the power supply

or other installed modules.

31589-M

Wire the Ethernet Connector

Use an RJ45 connector to connect

to the EtherNet/IP network. Wire

the connector as shown.

For detailed EtherNet/IP

connection information, see the

EtherNet/IP Media Planning and

Installation Manual, available from

the Open DeviceNet Vendor

Association (ODVA) at

http://www.odva.org

RJ 45

8 ------ NC

7 ------ NC

6 ------ RD-

5 ------ NC

4 ------ NC

3 ------ RD+

2 ------ TD-

1 ------ TD+