Instruction Manual

Rockwell Automation Publication 1756-UM514C-EN-P - June 2014 43
Installing the Modules Chapter 3
5. Apply chassis power.
6. Check power supply and module status.
Network Connectors and
Cable
The following network connectors and cable are available for the modules.
Parts Requirements
DH-RIO/DH+ Belden 9463 twinaxial
DH-RIOXT/DH+ Belden 89463 twinaxial
Programming (nonhazardous) 1784-CP
Programming (hazardous) 1784-U2DHP