Instruction Manual

142 Rockwell Automation Publication 1756-UM514C-EN-P - June 2014
Chapter 11 Connecting a ControlLogix Controller to Remote I/O
Configure First 1756-CNB Module
Use the Studio 5000 environment to configure the 1756-CNB module. The
following figure shows some sample configuration dialog boxes for the first
1756-CNB module in this example.
Configure the Second 1756-CNB Module
Use the Studio 5000 environment to configure the 1756-CNB module. The
following figure shows some sample configuration dialog boxes for the second
1756-CNB module in this example.